PACIFIC FERTILISER

Tag: dirranbandi gypsum

Gypsum Quality Comparison Report 2017

Pacific Fertiliser recently added more gypsum pits to a study it undertook in 2015 for detailed research into the bulk agricultural gypsum products available on the eastern seaboard of Australia. This research continues on from the NSW Department of Primary Industries work in 1996 which was reported in the AgFact AC.10 (Agdex 514) document.

The numerous gypsum samples were obtained from various agricultural gypsum sources either ex mine pit or from product landed on the farm. Pacific Fertiliser natural gypsum and REGYP recycled gypsum products were tested during the research and these were taken from our finished product stockpiles.

The main items we tested for were gypsum purity, sizing and solubility. The results enable us to benchmark our products against others, but also to help customers in their evaluation of which gypsum to use when they are looking to purchase gypsum for their farm or project.

When testing for gypsum solubility, we employed the method used in the AgFact AC.10 paper. This test method is more indicative of what happens in the paddock rather than the normal method to test solubility, where gypsum samples are finely ground up before being analysed. Due to the river bed gypsum having higher salt contents we had to adjust the solubility results to reflect the true gypsum solubility.

If you have any questions or would like to view the full report please feel free to call 1300473497 or visit our website www.pacificfertiliser.com

Test Laboratory:
Pacific Fertiliser commissioned Cement Australia to do the gypsum analysis work in 2015 through to 2017 for our research. Cement Australia’s laboratory in Darra QLD is NATA approved and very proficient and experienced in testing gypsum and other minerals.

Test Methods:
Gypsum Purity:-                      Calculated from Sulphur (S) content. (18.6% Sulphur is 100% CaSO4.2H2O)
Sulphur Content: –                  X-ray fluorescence (XRF)
Total Calcium:- XRF
Total Oxides:- XRF
Moisture Content:-                 AS 4489.8.1, modified for gypsum by limiting heat to 40ºC for 24 hrs.
Particle Size:- Analysis Dry sieve
Gypsum Solubility:-                As per the method used in the NSW AGFACTS AC.10. Solubility is expressed as electrical conductivity (EC) of solution obtained by adding the equivalent of 10g of pure gypsum (CaSO4.2H2O) to 1 litre of demineralised water. This solution is gently shaken (20 times end over end) and placed in a centrifuge for 10 minutes. The unit of electrical conductivity is dS/m.
Adjusted solubility:-                Pacific Fertiliser added a modified column to the analysis results in the above table, to allow for the effect on electrical conductivity in the gypsum samples with a higher salt content. The measured electrical conductivity (EC) of a solution is influenced by the concentration and composition of dissolved salts. In the 1996 results Bourke solubility was 0.4 dS/m and Balranald was 1.0 dS/m.

Please download a full copy of the research report here (17mB)

March 30, 2017
Gypsum Prospecting

[fusion_builder_container type=”flex” hundred_percent=”no” equal_height_columns=”no” menu_anchor=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”center center” background_repeat=”no-repeat” fade=”no” background_parallax=”none” parallax_speed=”0.3″ video_mp4=”” video_webm=”” video_ogv=”” video_url=”” video_aspect_ratio=”16:9″ video_loop=”yes” video_mute=”yes” overlay_color=”” video_preview_image=”” border_color=”” border_style=”solid” padding_top=”” padding_bottom=”” padding_left=”” padding_right=””][fusion_builder_row][fusion_builder_column type=”1_1″ layout=”1_1″ background_position=”left top” background_color=”” border_color=”” border_style=”solid” border_position=”all” spacing=”yes” background_image=”” background_repeat=”no-repeat” padding_top=”” padding_right=”” padding_bottom=”” padding_left=”” margin_top=”0px” margin_bottom=”0px” class=”” id=”” animation_type=”” animation_speed=”0.3″ animation_direction=”left” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” center_content=”no” last=”true” min_height=”” hover_type=”none” link=”” border_sizes_top=”” border_sizes_bottom=”” border_sizes_left=”” border_sizes_right=”” first=”true”][fusion_text]

Pacific Fertiliser has been out to take gypsum samples of the exploration area in the Culgoa area. The initial results are promising.

Gypsum available from a potential Culgoa gypsum mine would enable Pacific Fertiliser to sell back to Goondiwindi from the west of hebel and further to the north and south.

The target area captures a lot of the irrigated cotton growing country as well as dry land grain growers, that Pacific Fertiliser’s Brisbane plant is a little too far from.

The results from testing the Mulga Gypsum sampled within the exploration area will be compared with the recent eastern seaboard gypsum comparison undertaken by Pacific Fertiliser – see link.

[/fusion_text][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

June 8, 2015
Gypsum Comparison Results 2015

Pacific Fertiliser recently undertook detailed research into the bulk agricultural gypsum products available on the eastern seaboard of Australia. This research continues on from the NSW Department of Primary Industries work in 1996 which was reported in the AgFact AC.10 (Agdex 514) document.

The gypsum samples were obtained from various agricultural gypsum sources either ex mine pit or from product landed on the farm. Pacific Fertiliser and REGYP gypsum products were also tested during the research and these were taken from finished product stockpiles.

The main items we tested for were gypsum purity, sizing and solubility. The results enable us to benchmark our products against others, but also to help customers in their evaluation of which gypsum to use when they are looking to purchase gypsum for their farm or project.

When testing for gypsum solubility, we employed the method used in the AgFact AC.10 paper. This test method is more indicative of what happens in the paddock rather than the normal method to test solubility, where gypsum samples are finely ground up before being analysed. Due to the river bed gypsum having higher salt contents we had to adjust the solubility results to reflect the true gypsum solubility.

If you have any questions or would like to view the full report please feel free to call 1300473497 or visit our website www.pacificfertiliser.com

Test Laboratory:
Pacific Fertiliser commissioned Cement Australia to do the gypsum analysis work for our research. Cement Australia’s laboratory in Darra QLD is NATA approved and very proficient and experienced in testing gypsum and other minerals.

Test Methods:
Gypsum Purity:-                      Calculated from Sulphur (S) content. (18.6% Sulphur is 100% CaSO4.2H2O)
Sulphur Content: –                  X-ray fluorescence (XRF)
Total Calcium:- XRF
Total Oxides:- XRF
Moisture Content:-                 AS 4489.8.1, modified for gypsum by limiting heat to 40ºC for 24 hrs.
Particle Size:- Analysis Dry sieve
Gypsum Solubility:-                As per the method used in the NSW AGFACTS AC.10. Solubility is expressed as electrical conductivity (EC) of solution obtained by adding the equivalent of 10g of pure gypsum (CaSO4.2H2O) to 1 litre of demineralised water. This solution is gently shaken (20 times end over end) and placed in a centrifuge for 10 minutes. The unit of electrical conductivity is dS/m.
Adjusted solubility:-                Pacific Fertiliser added a modified column to the analysis results in the above table, to allow for the effect on electrical conductivity in the gypsum samples with a higher salt content. The measured electrical conductivity (EC) of a solution is influenced by the concentration and composition of dissolved salts. In the 1996 results Bourke solubility was 0.4 dS/m and Balranald was 1.0 dS/m.

Please download a full copy of the research report here (13mB).

April 8, 2015
Gypsum Shipments

We have received the latest shipment of gypsum.

Whilst Pacific Fertiliser continues to import high quality bulk gypsum products from other states and overseas, it is also exploring gypsum resources in NSW & QLD to satisfy the market.

Pacific Fertiliser generally holds the following stockpiles:
– 20,000 tonne of natural gypsum in stock in Brisbane;
– 10,000 tonne of natural gypsum in Sydney;
– 10,000 tonne of natural gypsum in Melbourne;
– We hold minimal stock in Cowra NSW and Bundaberg QLD.

July 28, 2014
Brisbane Gypsum

PacFert can offer mined gypsum loading from bogie loads to road train trailers and B-doubles from Pinkenba and Port of Brisbane in QLD.

Other special products and blends come out of the Ipswich site.

We can package the natural high quality grade 1 gypsum with competitive bulk transport and spreading services.

Our gypsum is 95+% pure, ensuring you aren’t buying, transporting and spreading a large percentage of dirt or other impurities.

April 27, 2014
Pacific Fertiliser Sales
[fusion_builder_container type=”flex” hundred_percent=”no” equal_height_columns=”no” menu_anchor=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”center center” background_repeat=”no-repeat” fade=”no” background_parallax=”none” parallax_speed=”0.3″ video_mp4=”” video_webm=”” video_ogv=”” video_url=”” video_aspect_ratio=”16:9″ video_loop=”yes” video_mute=”yes” overlay_color=”” video_preview_image=”” border_color=”” border_style=”solid” padding_top=”” padding_bottom=”” padding_left=”” padding_right=””][fusion_builder_row][fusion_builder_column type=”1_1″ layout=”1_1″ background_position=”left top” background_color=”” border_color=”” border_style=”solid” border_position=”all” spacing=”yes” background_image=”” background_repeat=”no-repeat” padding_top=”” padding_right=”” padding_bottom=”” padding_left=”” margin_top=”0px” margin_bottom=”0px” class=”” id=”” animation_type=”” animation_speed=”0.3″ animation_direction=”left” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” center_content=”no” last=”true” min_height=”” hover_type=”none” link=”” border_sizes_top=”” border_sizes_bottom=”” border_sizes_left=”” border_sizes_right=”” first=”true”][fusion_text columns=”” column_min_width=”” column_spacing=”” rule_style=”” rule_size=”” rule_color=”” hue=”” saturation=”” lightness=”” alpha=”” user_select=”” content_alignment_medium=”” content_alignment_small=”” content_alignment=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” sticky_display=”normal,sticky” class=”” id=”” margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” fusion_font_family_text_font=”” fusion_font_variant_text_font=”” font_size=”” line_height=”” letter_spacing=”” text_transform=”” text_color=”” animation_type=”” animation_direction=”left” animation_color=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=”” logics=””]

To avoid confusion between natural mined products and recycled gypsum products, we have started PACIFIC FERTILSER to separate the natural products from REGYP. From July 1 2013, sales will go through the following process:
1. PACIFIC FERTILISER – from 1 July 2013, sells all the natural mined products inc mined gypsum, phosphate rock, lime, bentonite and dolomite ontop of fertiliser sales;
2. REGYP – will continue to sell all of the recycled products inc bulk recycled gypsum, compost & manures.
Contact details for REGYP remain as:

Phone – 1300 473 497

Fax – 02 80786 3047

Email Orders/Sales – orders @ regyp.com.au

Email Accounts – accounts @ regyp.com.au

[/fusion_text][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]
July 8, 2013